American DJ Octo Beam WW
Free Ground Shipping
The ADJ Octo Beam WW produces a classic effect with a modern twist! The effect looks like an all white Halogen bulb effect but in essence uses 8x 3-Watt warm white LEDs. It produces sharp, bright beams at a 3.4 degree beam angle. The Octo Beam WW has 3 DMX channel modes (1, 8 or 10), 3 operational modes (Sound Active, Show or DMX modes), LED pulse and strobe effects and 0-100% electronic dimming. The rear control panel features a 4-button LED display menu, 3-pin DMX In/Out connections and IEC In/Out for power linking up to 12 units at 120V or 19 units at 230V operation. This fixture is compatible with the ADJ UC3 easy-to-use controller. Specifications: - 8-head beam effect with eight warm white LED’s - 3 DMX Channel modes: 1, 8 or 10 channel modes - 3 Operational modes: Sound Active Mode, Show Mode, & DMX Controlled - Stand Alone or Master-Slave Configuration & Manual control of each fixture head setting Dim and Full on. - LED pulse & strobe effect - Flicker Free - Electronic Dimming: 0 - 100% - Beam angle: 3.4-degree - Linkable via 3-pin XLR cable - 4-button digital display on rear panel - IEC AC IN/OUT on rear to daisy chain power (up to 12 Octo Beam WW’s @ 120V and 9 Octo Beam WW’s @ 230V ) - Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately) - Includes mounting yoke to mount on a wall or on to trussing - Light Source: 8x 3W (2700K-3300K) Warm White LED source (Rated at approximately 50,000 hours) - Safety loop on rear - Run all night – No duty cycle - Low power consumption - Multi-voltage: 100-240V, 50/60Hz - Power Draw: 28.9W max (All LED's @ Full On) - Dimensions (LxWxH): 632.6 x 226.9 x 199mm - Weight: 3.5 kg.